var butname=new Object();
butname.apply="Apply";
butname.cancel="Cancel";
butname.viewstatus="View Statistics";
butname.viewassoc="View Association List";
butname.interval="Set Interval";
butname.stop="Stop";
butname.Refresh="Refresh";
butname.clearlog="Clear Log";
butname.back="Back";
butname.backup="Backup";
butname.upload="Upload";
butname.reset="Reset";
butname.generate="Generate";
butname.next="Next";
butname.scan="Refresh";
butname.ignore="Ignore";
butname.finish="Finish";
butname.login="Login";
butname.Continue="Continue";
butname.Return="Return";
// Peggy 2004/11/04
butname.IconAbout="About";
butname.IconHelp="Help";
butname.Start="Start";

var otist=new Object();
otist.fullname="One-Touch Intelligent Security Technology";
otist.setupkey="Setup Key";
otist.desc1="Yes! Please enhance the Wireless Security Level to WPA-PSK automatically if no any WLAN security has been set. This will generate a random PSK key later for your convenience.";
otist.desc2="Please wait a moment. (about ";
otist.desc3=" Seconds)";
otist.desc4="OTIST in Process";
otist.err1="OTIST does not support WPA and 802.1X Wireless Security Level!!";// Peggy, 2004/12.02
otist.err2="The wireless security level is WPA-PSK now. The pre-shared key is ";
//otist.title="One-Touch Intelligent Security Technology";
//otist.butStatr="Start";

var login=new Object();
login.desc="ZyXEL G-560 802.11g Wireless Access Point";
login.desc1="Welcome to ZyXEL Web-Based Configurator !";
login.selcfglang="Select configuration language";
login.enterpwd="Enter password and click to login.";
login.pwd="Password";
login.pwdmaxlen="( max. 30 printable characters and no spaces )";
login.err1="G-560 only support 1 user log in Web.";
login.err2="Please try again later...";

var newpwd=new Object();
newpwd.desc="Enter your new password and retype to confirm.";
newpwd.newpwd="New Password";
newpwd.newpwddesc="( max. 30 printable characters and no spaces )";
newpwd.retype="Retype to Confirm";
newpwd.error="Error : The new password and retyped password are different.";

var wstatus=new Object();
wstatus.title="STATUS";
wstatus.deviceinfo="Device Information";
wstatus.devname="Device Name";
wstatus.opmode="Operation Mode";
wstatus.macaddr="MAC Address";
wstatus.firmver="Firmware Version";
wstatus.ipset="IP Settings";
wstatus.ipaddr="IP Address";
wstatus.mask="IP Subnet Mask";
wstatus.gwip="Gateway IP Address";
wstatus.wireless="Wireless Settings";
wstatus.ssid="SSID";
wstatus.channel="Channel";
wstatus.encrymethod="Encryption Method";
wstatus.macfilter="MAC Filter";
wstatus.viewstatus="View Status";
wstatus.port="Port";
wstatus.txpkts="TxPkts";
wstatus.rxpkts="RxPkts";
wstatus.collisions="Collisions";
wstatus.lan="LAN";
wstatus.wlan="WLAN";
wstatus.sysuptime="System Up Time";
wstatus.interval="Poll Interval(s)";
wstatus.assoclist="Association List";
wstatus.assoctime="Association Time"; /* marcel, 12.02.2004 */
wstatus.no="NO";

var wlan=new Object();
wlan.title="SETTINGS / WIRELESS";
wlan.wlanset="Wireless Settings";
wlan.security="Security";
wlan.macfilter="MAC Filter";
wlan.OTIST="OTIST";
wlan.basicset="Basic Settings";
wlan.opmode="Operation Mode";
wlan.ap="Access Point";
wlan.repeater="Repeater";
wlan.bridge="Bridge";
wlan.apclient="AP Client";
wlan.ssid="SSID";
wlan.HiddenSSIDSupport = "Hide SSID";/* Peggy 2004/11/03 */
wlan.ssiddesc="(Max 32 printable characters)";
wlan.channel="Channel";
wlan.wlanmode="Wireless Mode";
wlan.wlanmodesel1="Mixed Mode";
wlan.wlanmodesel2="Pure G Mode";
wlan.wlanmodesel3="Pure B Mode";
wlan.wlanmodesel4="G+";
wlan.wlanmodesel5="B+";
wlan.advset="Advanced Settings";
wlan.rtsthreshold="RTS/CTS Threshold";
wlan.rtsrng="(0 ~ 2432, G+ must be 4096)";
wlan.fragment="Fragmentation";
wlan.fragmentrng="(256 ~ 2432, G+ must be 4096)";
wlan.intrabss="Enable Intra-BSS Traffic";
wlan.intrabssdesc="(Allow communications between wireless stations)";
wlan.wlannum="Number of Wireless Stations Allowed to Associate";
wlan.wlannumdesc="(max. 32)";
wlan.preambletype="Preamble Type";
wlan.preambletypesel1="Short";
wlan.preambletypesel2="Long";
wlan.preambletypesel3="Auto"; /* Peggy 2004/11/03 */
wlan.outpower="Output Power Management";
wlan.outpowersel1="Full";
wlan.outpowersel2="50%";
wlan.outpowersel3="25%";
wlan.outpowersel4="12%";
wlan.outpowersel5="6%";
wlan.qos="Quality of Service (QoS/WMM)";

var security=new Object();
security.secset="Security Settings";
security.encry="Encryption Method";
security.disable="Disable";
security.wep="WEP";
security.wpapsk="WPA-PSK";
security.wpa="WPA";
security.wpa2psk="WPA2-PSK";
security.wpa2="WPA2";
security.s8021x="802.1x";
security.wpa2pskmixed="WPA-PSK / WPA2-PSK Mixed";
security.wpa2mixed="WPA / WPA2 Mixed";

var wep=new Object();
wep.authtype="Authentication Type";
wep.wepopen="Open";
wep.shared="Shared";
wep.auto="Auto";
wep.wepencry="WEP Encryption";
wep.desc="Enter a passphrase to automatically generate a WEP key or leave it blank if you want to manually enter the WEP key.";
wep.passphrase="Passphrase";
wep.passphrasedesc="(max. 32 characters)";
wep.ascii="ASCII";
wep.hex="Hex";
wep.key1="Key 1";
wep.key2="Key 2";
wep.key3="Key 3";
wep.key4="Key 4";
wep.wep64bit="64-bit WEP";
wep.wep128bit="128-bit WEP";
wep.wep256bit="256-bit WEP";
wep.wepdesc="64-bit WEP: Enter 5 ASCII characters or 10 hexadecimal characters ("0-9", "A-F").";
wep.wepdesc1="128-bit WEP: Enter 13 ASCII characters or 26 hexadecimal characters ("0-9", "A-F&quot).";
wep.wepdesc2="256-bit WEP: Enter 29 ASCII characters or 58 hexadecimal characters ("0-9", "A-F&quot).";

var wpapsk=new Object();
wpapsk.presharedkey="Pre-Shared Key";
wpapsk.desc="(8 to 63 case-sensitive characters)";

var wpa=new Object();
wpa.authserv="Authentication Server";
wpa.authservip="Authentication Server IP Address";
wpa.portnum="Port Number";
wpa.shared="Shared Secret";
wpa.shareddesc="(8~63 characters)";

var wlan8021x=new Object();
wlan8021x.dynwepkey="Dynamic WEP Key Exchange";
wlan8021x.radiusserv="RADIUS Server";

var macfilter=new Object();
macfilter.macfilter="MAC Address Filter";
macfilter.active="Active";
macfilter.allow="Allow the following MAC Address to associate";
macfilter.deny="Deny the following MAC address to associate";
macfilter.macaddr="MAC Address";

var basicset=new Object();
basicset.title="SETTINGS / SYSTEM";
basicset.sysset="System Settings";
basicset.devset="Device Settings";
basicset.devname="Device Name";
basicset.devnamedesc="( max. 30 printable characters )";
basicset.ipaddrassign="IP Address Assignment";
basicset.ipaddrauto="Obtain IP Address Automatically";
basicset.fixip="Use Fixed IP Address";
basicset.ipaddr="IP Address";
basicset.mask="Subnet Mask";
basicset.gwip="Gateway IP Address";
basicset.timeset="Time Settings";

var timezone=new Object();
timezone.generalsetup="General Setup";
timezone.time="Time";
timezone.timedesc="(hh-mm-ss)";
timezone.date="Date";
timezone.datedesc="(yyyy-mm-dd)";

var chgpwd=new Object();
chgpwd.title="SETTINGS / MANAGEMENT";
chgpwd.pwd="Password";
chgpwd.pwdsetup="Password Setup";
chgpwd.currpwd="Current Password";
chgpwd.newpwd="New Password";
chgpwd.confirm="Retype to Confirm";
chgpwd.logs="Logs";
chgpwd.cfgfile="Configuration File";
chgpwd.fwupload="F/W Upload";
chgpwd.lang="Language";

var logs=new Object();
logs.logslist="Logs List";
logs.display="Display";
logs.alllogs="All Logs";
logs.time="Time";
logs.message="Message";
logs.src="Source";
logs.dest="Destination";
logs.note="Note";

var cfgfile=new Object();
cfgfile.bkpcfg="Backup Configuration";
cfgfile.bkpcfgdesc="This page allows you to backup your current configuration to your computer. Click the \"Backup\" button to start the backup process.";
cfgfile.restorecfg="Restore Configuration";
cfgfile.restorecfgdesc="To restore your configuration from a previously saved configuration file, browse to the location of the configuration file and click the \"Upload\" button";
cfgfile.filepath="File Path";
cfgfile.facdef="Back to Factory Defaults";
cfgfile.facdefdesc="The \"reset\" button will clear all user-entered configuration and will reset the device settings back to its factory default value. After reset to factory default settings, please remember the following value to be able to login the device again.";
cfgfile.pwd="Password";
cfgfile.lanip="LAN IP Address";

cfgfile.restoresucc="Restore Configuration successful";
cfgfile.restoresucc1="The Device Is Rebooting Now.";
cfgfile.restoresucc2="Please Wait ...";
cfgfile.restoresucc3="After the device finishes rebooting, the login screen displays.";
cfgfile.restoreerr="Restore Configuration error!";
cfgfile.restoreerr1="The configuration file was not accepted by the device. Please return to the previous page and select a valid configuration file. Click Help for more information.";
cfgfile.facdefsucc="Device back to factory defaults";
cfgfile.facdefsucc1="The device will now reboot.";
cfgfile.facdefsucc2="As there will be no indication of when the process is complete, please wait for one minute before attempting to access the device again.";

var fwupload=new Object();
fwupload.firmware="Firmware Upload";
fwupload.desc="To upgrade the internal system firmware, browse to the location of the binary (.BIN) upgrade file and click the \"Upload\". Download firmware files from ZyXEL's website. If the file is compressed,(for example, a .ZIP file), you must first extract the binary (.BIN) file.";
fwupload.filepath="File Path";

fwupload.succ="Firmware Upload In Process";
fwupload.succ1="Warning!";
fwupload.succ2="Do Not Turn Off the Device.";
fwupload.succ3="Please wait for the device to finish restarting(PWR LED is on steady). This should take about two minutes.";
fwupload.succ4="To access the device after a successful firmware upload, you need to log in again. Check you new firmware version in the system status menu.";
fwupload.err="Firmware upload error!";
fwupload.err1="The uploaded file was not accepted by the device.Please return to the previous page and select a valid upgrade file. Click Help for more information.";

var lang=new Object();
lang.sellang="Select your language";

var wzwan=new Object();
wzwan.step1="STEP 1";
wzwan.basicset="BASIC SETTINGS";

var wzwlan=new Object();
wzwlan.setupwizard="SETUP WIZARD";
wzwlan.step2="STEP 2";
wzwlan.wlanset="WIRELESS SETTINGS";
wzwlan.desc="Enter an unique SSID for your wireless network. To associate with this access point, all wireless clients or access points must use the same SSID and same channel entered here below.";
wzwlan.ssiddesc="( max. 32 printable characters )";
wzwlan.note="Note";
wzwlan.desc1="Unless you're concerned with the interference from other access points, you do not need to change the following default channel.";

var wzsec=new Object();
wzsec.step3="STEP 3";
wzsec.secset="SECURITY SETTINGS";
wzsec.desc="Selected your desired encryption method to secure your wireless network .";
wzsec.desc1="WEP key is the basic encryption method. Choose one of the WEP encryption levels below.";
wzsec.wepkey="Manual WEP Key";
wzsec.desc2="WPA-PSK is an advanced encryption method.   By sharing the Pre-Shared Key you entered below, the wireless clients or other access points can securely associate.";

var wzfinish=new Object();
wzfinish.step4="STEP 4";
wzfinish.confirm="CONFIRM YOUR SETTINGS !";
wzfinish.confirm1="Confirm your settings";

var logout=new Object();
logout.desc="Thank you for using ZyXEL Wireless Access Point.";
logout.bye="Good-bye!";

var leftmenu=new Object();
leftmenu.status="STATUS";
leftmenu.setupwz="SETUP WIZARD";
leftmenu.set="SETTINGS";
leftmenu.sys="SYSTEM";
leftmenu.wlan="WIRELESS";
leftmenu.management="MANAGEMENT";
leftmenu.logout="LOGOUT";

var errmsg=new Object();
errmsg.err="have illegal characters, must be [ 0 - 9 ]";
errmsg.err1="value is out of range";
errmsg.err2="length is out of range";
errmsg.err3="The MAC Address is not correct";
errmsg.err4="The MAC Address length is not correct";
errmsg.err5="The MAC Address cannot be the broadcast address";
errmsg.err6="The second character of MAC must be even number : [0, 2, 4, 6, 8, A, C, E]";
errmsg.err7="Invalid MAC address format";
errmsg.err8="The WAN MAC Address is not correct";
errmsg.err9="Invalid hex value";
errmsg.err10="found in MAC address";
errmsg.err11="Ready";
errmsg.err12="You have to enter a key for Key";
errmsg.err13="Invalid Length in key";
errmsg.err14="have illegal hexadecimal digits";
errmsg.err15="User login timed out";
errmsg.err16="Login again";
errmsg.err17="Status";
errmsg.err18="Please enter a Passphase";
errmsg.err19="Please enter a Passphase  0 ~ F";
errmsg.err20="If the IP address in TCP/IP is changed, please close the window.";
errmsg.err21="Duplicate Login, Please Try Again Later!!";

errmsg.err22="Device Name field cannot be NULL or all Spaces";
errmsg.err23="SSID field cannot be NULL or all Spaces";
errmsg.err24="Telnet administrator is configuring this device!!";
errmsg.err25="The New Password And Retype Password Are Different, They Should Be The Same.";
errmsg.err26="Modified Settings are applying...";
errmsg.err27="Time fields Cannot be NULL.";
errmsg.err28="Date fields Cannot be NULL.";

/* Peggy add for wds tag 2005.06.09 */
var wds=new Object();
wds.title="Wireless Bridge (Wireless Distribution System)";
wds.active="Active";
wds.macaddr="Remote Bridge(s) MAC Address (BSSID)";
wds.desc2=" Please make sure the IP address of each #1..#4 WDS bridge is different";
wds.desc3=" All #1..#4 WDS bridge(s) need to have the same channel and different SSID settings in order to communicate";